Dengwei International Trade is mainly engaged in various high-end steel import and export businesses, and is a brand enterprise in the metal circulation industry.
 |
| Quantity: | |
|---|---|
Inconel 718 wire is a high-performance, nickel-based superalloy designed for extreme strength, corrosion resistance, and thermal stability in aerospace and turbine applications. Conforming to ASTM B637 and AMS 5662 specifications, this alloy wire performs reliably in environments exceeding 700°C and is widely used in the manufacture of jet engines, turbine blades, combustion systems, and other high-temperature components.
High tensile and fatigue strength
Excellent resistance to oxidation and corrosion
Maintains mechanical integrity up to 700°C
Superb weldability and formability
Meets global standards: UNS N07718, AMS 5662, ASTM B637
| Element | Content (%) |
|---|---|
| Nickel (Ni) | 50.0 – 55.0 |
| Chromium (Cr) | 17.0 – 21.0 |
| Iron (Fe) | Balance |
| Niobium + Tantalum (Nb + Ta) | 4.75 – 5.50 |
| Molybdenum (Mo) | 2.80 – 3.30 |
| Titanium (Ti) | 0.65 – 1.15 |
| Aluminum (Al) | 0.20 – 0.80 |
| Property | Typical Value |
|---|---|
| Tensile Strength | ≥ 965 MPa |
| Yield Strength (0.2% offset) | ≥ 550 MPa |
| Elongation | ≥ 30% |
| Hardness | ≤ 363 HB |
| Working Temperature | -253°C to 700°C |
| Wire Diameter Range | Condition | Form | Tolerance |
|---|---|---|---|
| 0.05 mm – 8.0 mm | Annealed / Cold Drawn | Coil / Spool / Straight Length | ±0.01 mm |
Inconel 718 wire is widely used in:
Aerospace components: turbine blades, engine rings, and fasteners
Gas turbines and combustion chambers
Spring wires for extreme conditions
Nuclear energy and marine systems
Chemical and cryogenic processing units
Precision cold drawing and polishing
Bright annealing and solution treatment
Cut-to-length, coil packing, or bobbin-winding
OEM customization available
We can produce Inconel 718 wire as thin as 0.05 mm with tight tolerance control, suitable for precision aerospace or micro-spring applications.
Yes. It performs well from -253°C to 700°C, offering both low-temperature toughness and high-temperature strength.
We offer bright, matte, and oxide-free finishes depending on your technical and visual requirements.
Yes. We support OEM and low-volume production for R&D or specialty aerospace projects. Contact us for custom sizing and sampling.
Inconel 718 wire is a high-performance, nickel-based superalloy designed for extreme strength, corrosion resistance, and thermal stability in aerospace and turbine applications. Conforming to ASTM B637 and AMS 5662 specifications, this alloy wire performs reliably in environments exceeding 700°C and is widely used in the manufacture of jet engines, turbine blades, combustion systems, and other high-temperature components.
High tensile and fatigue strength
Excellent resistance to oxidation and corrosion
Maintains mechanical integrity up to 700°C
Superb weldability and formability
Meets global standards: UNS N07718, AMS 5662, ASTM B637
| Element | Content (%) |
|---|---|
| Nickel (Ni) | 50.0 – 55.0 |
| Chromium (Cr) | 17.0 – 21.0 |
| Iron (Fe) | Balance |
| Niobium + Tantalum (Nb + Ta) | 4.75 – 5.50 |
| Molybdenum (Mo) | 2.80 – 3.30 |
| Titanium (Ti) | 0.65 – 1.15 |
| Aluminum (Al) | 0.20 – 0.80 |
| Property | Typical Value |
|---|---|
| Tensile Strength | ≥ 965 MPa |
| Yield Strength (0.2% offset) | ≥ 550 MPa |
| Elongation | ≥ 30% |
| Hardness | ≤ 363 HB |
| Working Temperature | -253°C to 700°C |
| Wire Diameter Range | Condition | Form | Tolerance |
|---|---|---|---|
| 0.05 mm – 8.0 mm | Annealed / Cold Drawn | Coil / Spool / Straight Length | ±0.01 mm |
Inconel 718 wire is widely used in:
Aerospace components: turbine blades, engine rings, and fasteners
Gas turbines and combustion chambers
Spring wires for extreme conditions
Nuclear energy and marine systems
Chemical and cryogenic processing units
Precision cold drawing and polishing
Bright annealing and solution treatment
Cut-to-length, coil packing, or bobbin-winding
OEM customization available
We can produce Inconel 718 wire as thin as 0.05 mm with tight tolerance control, suitable for precision aerospace or micro-spring applications.
Yes. It performs well from -253°C to 700°C, offering both low-temperature toughness and high-temperature strength.
We offer bright, matte, and oxide-free finishes depending on your technical and visual requirements.
Yes. We support OEM and low-volume production for R&D or specialty aerospace projects. Contact us for custom sizing and sampling.
